There may be times when you need to run the pump outside of normal run times and these could include:
- Adding buffer, calcium, salt or acid to the pool and allowing it to dissolve and be distributed in the water outside of normal pump run times.
- Manually vacuuming your pool - click HERE.
Solutions:
- Press the POWER MODE button to ON (green LED) and the pump will start, this is known as MANUAL MODE. Take Note if left ON the system will automatically go back to AUTO at the next OFF and ON time of the TIMER.
- You can also press the OXI button which will run the pump non stop for 24 hours and once completed will return to AUTO Mode. If 24 hours is too long you can simply press the OXI button again once completed and it will return to AUTO.
- For units purchased from Sept 2024 and beyond - Press the OK button to access the Main Menu and using the (+) and (-) buttons scroll to 11 - Service Menu and press OK. Scroll to S10 - Pump Run Time and press OK, there are two options for running the pump outside of normal run times. 1. Pump Single Run - Here you can set how many hours you want the PUMP ONLY to run for a one off cycle. 2. Pump On Timers - You can set Start and Stop times for two cycles that will run everyday outside of the normal run times set in the Naked System.