What do I need to do to the controller when I need to vacuum to WASTE?
Press the BACKWASH button
Turn the Multi Port Valve on your filter to WASTE...NOT BACKWASH
Press [OK] and the pump will start and will run for 2 mins default.
Press the [+] button to increase the mins to 3 (maximum) and you can start vacuuming the pool to waste (take note this is draining your pool so if water drops below the skimmer box a WATER FLOW FAULT could occur if suction for the pump is lost during the process).
If more time is needed to vacuum the pool return to the unit and increase the time by pressing the [+] button back to 3 mins.
Once completed follow the prompts on the screen (skipping RINSE) and return the Multi Port Valve back to the FILTER position.
Press the BACKWASH button and the unit will return to AUTO and resume normal filtration.
Another simple way to vacuum is to Press the POWER Button once to OFF and unplug the pump from the bottom of the Naked System. Plug the pump straight into the wall and you can now run the pump for as long you wish, remembering when finished to plug the pump back in to the base of the Control Unit and return the system to AUTO.