The % of the OXI OUT will decrease most commonly due to heavy rainfall or dilution. It is recommended to check your TDS levels and re balance the pool in order to get back to 100%.
- When in the DDS screen press the [+] button and OXI OUT will change to OXI SET, this should always to be at 100% unless in WINTER MODE and if not please increase this by pressing the [+] button.
- If OXI OUT is still not reading 100% a small amount of salt may be needed to increase this back to 100%.
- Temperature also affects the conductivity of water, so in winter it is normal for the % to reduce and will increase again as the water warms up.
- Ideal TDS levels for a Naked Pool is 800-1200ppm.