The Naked System has 2 timers because the sanitisation time (TIMER 1) is traditionally less than a typical chlorine/mineral pool. To ensure the water in the pool is turned over for adequate circulation and filtration a second timer (TIMER 2) operates.
- The out of the box setup for a Naked Freshwater Pool automatically sets up a DUAL CYCLE timer.
- All timers are automatically set up and based on the volume of water entered when starting the system.
Example #1 - 50,000L Pool:
TIMER 1 would run for 5 hours 08:00 to 13:00 and TIMER 2 would run for 2 hours 14:00-16:00
Example #2 - 80,000L Pool:
TIMER 1 would run for 8 hours 06:00 to 14:00 and TIMER 2 would run for 2 hours 15:00-17:00
- TIMER 1 is the CRITICAL timer. Whilst TIMER 1 is running your pool is being oxidised and sanitised which is keeping the pool water nice and clear. This is also the time that a small amount of chlorine is being produced.
- TIMER 2 is for filtration and circulation. Please note during this time the OXI Cell will be OFF and OXI OUT will be 0% and come on for the last hour.
The Naked Freshwater Pool System can be customised to your pool and adjusting the timers is easy.